The Husqvarna Rider R 112C is a ride-on mower with a front-mounted deck and centre articulated steering – built for gardens with lots of trees, beds and narrow passages. The supplied Combi 85 deck cuts 85 cm wide and mulches as standard. With a turning circle of just 65 cm, the Rider gets where a conventional lawn tractor has to manoeuvre.
Your benefits
- Centre articulated steering and 65 cm turning circle: the Rider drives around trees and beds in one pass.
- Front-mounted deck: you see the cut ahead of you and reach edges and under shrubs.
- Combi 85 mulching deck included – the clippings fertilise the lawn, with no disposal needed.
- Mowing in reverse saves turning manoeuvres in tight corners.
- The oscillating rear axle and turf tread provide traction without stressing the sward.
Equipment and features
The R 112C is powered by a Husqvarna Series HS 413AE single-cylinder engine with 413 cm³, delivering 10 kW / 13.7 hp at 3,600 rpm, with key start. Power is transmitted through a manual gearbox with five forward gears and one reverse; top speed is 7 km/h. The oscillating rear axle keeps the drive wheels gripping even on uneven ground.
The pressed Combi 85 deck works with two blades over an 85 cm cutting width, is engaged manually and can be set in five steps from 25 to 70 mm. As a BioClip mulching deck it shreds the grass so finely that it can stay in the lawn; alternatively, the Rider leaves the clippings in a windrow via rear discharge.
The folding comfort seat with water drainage and articulated suspension adjusts to your height, and a cup holder is included as well as a tow hitch for trailers and attachments.
Technical data
| Engine | Husqvarna Series HS 413AE, 1 cylinder, petrol |
|---|---|
| Displacement | 413 cm³ |
| Engine output | 10 kW / 13.7 hp at 3,600 rpm |
| Transmission | Manual gearbox, 5 forward / 1 reverse |
| Drive | Rear-wheel drive |
| Top speed | 7 km/h |
| Steering | Centre articulated steering |
| Turning circle | 65 cm |
| Cutting width | 85 cm (Combi 85 deck), 2 blades |
| Cutting height | 25–70 mm, 5 steps, manual |
| Cutting methods | Mulching (BioClip), rear discharge windrowing |
| Dimensions (L × W × H) | 212 × 88 × 108 cm |
| Weight | 191 kg |
Which lawns and users is it suitable for?
The R 112C is the right ride-on mower for small to medium gardens with a complex layout: lots of trees, beds, paths and narrow passages. Articulated steering and the front deck noticeably reduce finishing work at the edges. If you want to collect leaves or clippings, a model with a grass collector is a better choice.
In the box
- Husqvarna Rider R 112C base unit
- Combi 85 cutting deck
- Tow hitch
- Operating instructions
Frequently asked questions
Does the R 112C have a hydrostatic transmission?
No. The Rider has a manual gearbox with five forward gears and one reverse, reaching up to 7 km/h.
Can the Rider collect clippings?
No. The Combi 85 deck mulches the grass or leaves it in a windrow via rear discharge; a grass collector is not available.
How is the cutting height set?
Manually in five steps between 25 and 70 mm – suitable for closely mown ornamental lawns as well as longer utility lawns.
